MAKITA CONCRETE GAS NAILER 7.2V GN420CSE

1,115.00

Makita Concrete Gas Nailer 7.2V GN420CSE is Makita’s first cordless nailer to drive pins into concrete.

The use of fuel cell as the power source provides freedom from hoses and compressors. Other main features are:

SKU: 88381635851 Category:

Description

GN420CSE Concrete Gas Nailer

Supplied with 2 x 7.2V Li-ion Batteries and Fast Charger in a Carry Case.

The GN420CSE is a cordless Concrete Gas Nailer, designed to drive pins into concrete, powered by 7.2V Li-ion battery to deliver up to 4,000 shots per fully charged battery. The use of fuel cell as the power source provides the freedom from hoses and compressors.

The GN420CSE has a depth adjustment dial to raise or lower the nose without a wrench, within a range of 4.5mm depending on the hardness of the work piece or the strength of concrete, the nose tip is designed to provide better visibility for quick and easy access to a desired driving point of the work piece and has a removable magazine assembly.

The Concrete Gas Nailer has an easy to grip, hard to slip designed handle to provide control and manoeuvrability and flat top housing to enable the machine to be placed upside down for resting.

LED job light to illuminate the work piece, with an independent on/off switch and LED indication lamp for battery power warning or trouble detection. The GN420CSE features anti-dry fire mechanism.

Please Note:

Any accessories shown are not necessarily supplied as standard equipment.

  • Tool-less depth adjustment dial to raise and lower the nose without a wrench
  • Flat top housing enables the concrete gas nailer to be placed upside down when not in use
  • Slim nose for greater visibility and easy access to the aimed point; enables the user to shoot nails into conne spaces
  • Removable magazine assembly
  • Fuel cell (not included) as the power source provides freedom from hoses and compressors
  • Led indication lamp for battery power warning and trouble detection
  • Led job light to illuminate the work area
  • Approximately 1, 200 shots per gas cell and 4, 000 shots per fully charged battery
  • Depth dial
  • Utility hook
  • LED job light
  • Anti-dry fire mechanism

Capacity:

  • Pin gauge 2.6 to 3.1mm
  • Maximum length 15 to 40mm
  • Magazine capacity 20 pins

What’s in the box?

  • 1 x Makita GN420CSE
  • 1 x Hex wrench
  • 1 x Safety goggles
  • 1 x No mar tip
  • 2 x 7.2V Li-ion batteries
  • 1 x 7.2V charger
  • 1 x Carry case

Additional information

Brand

Makita

Type

GN420CSE

Go to Top