Makita Li-Ion Lxt 20mm Sds-Plus Rotary Hammer 18v DHR202z is capable of drilling through steel, wood and masonry with ease. 3 mode operation, rotation only, hammering with rotation and hammering only.
MAKITA LI-ION LXT 20MM SDS-PLUS ROTARY HAMMER 18V DHR202Z
- Torque limiter to disengage the clutch in the event of a bit binding
- Conveniently located push button for forward and reverse
- Led job light to illuminate the work area
- One touch sliding chuck for quick and easy bit changes
- Triple operation mode for rotary only, hammer only and rotary hammer
- Rotation mode; the chisel can rotate a full 360 degrees with 40 different locking chisel positions
- Large 2 finger trigger and depth gauge
- Rubber joint construction to suppress transmission of vibration to the battery
- Maximum Capacity in steel 13mm, Wood 26mm,. Concrete 20mm
Makita DHR202Z 18V Li-ion LXT Rotary Hammer – No batteries included
Cordless 20mm Combination Hammer, SDS Plus Bits
The DHR202Z SDS-Plus Rotary Hammer is capable of drilling through steel, wood and masonry with ease. 3 mode operation, rotation only, hammering with rotation and hammering only. With the built in torque limiter, clutch disengages the motor should a bit bind.
Battery protection circuit protects against overloading, over discharging and over heating. Rubber joint construction suppresses transmission of vibration to battery, minimising battery failures due to terminal breakage or poor electrical contact.
40 different chisel positions
LED light illuminates drilling surface for more productivity in low light applications
One touch sliding chuck enables quick and easy bit changes
Depth gauge for increased drilling consistency
Variable speed trigger
Accessory shown not included.
- Maximum in concrete 20mm
- Maximum in steel 13mm
- Maximum in wood 26mm
- Up to 4,000 blows per minute