Motip Alu-Zinc Spray with good filling properties and excellent adhesion to treat galvanised and untreated steel. Alu-Zinc Spray offers outstanding cathodic corrosion prevention, is spot-weldable and is resistant to petrol, chemicals and the weather. MOTIP Alu-Zinc Spray is heat resistant to 250˚C.
MOTIP ALU-ZINC SPRAY
- Outstanding cathodic corrosion prevention
- Good filling property
- Resistant to petrol, chemicals and weather influences
- Fast drying
- Excellent adhesion
BEFORE USE, CAREFULLY READ THE DIRECTIONS ON THE PACKAGING AND ACT ACCORDINGLY.
The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.
The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 10 to 25°C.
Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.
Apply the alu-zinc spray in several thin layers. Before applying the next layer, again shake the aerosol. When desired, after drying a primer and a lacquer can be applied.
After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.