Motip Effect Enamel Fast drying nitro cellulose lacquer with good filling properties to embellish and repair pottery and enamelled surfaces. Enamel lacquer is resistant to cleaners and is wear resistant and scratch free. Deco Effect Enamel lacquer has good adhesion, good surface hardness and a lasting gloss.
MOTIP EFFECT ENAMEL
- Excellent coverage
- Fast drying
- Lasting gloss
THE SURFACE SHOULD BE CLEAN, DRY AND FREE OF GREASE. SLIGHTLY SAND THE SURFACE (GRAIN 600).
The aerosol should have room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.
Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol.
After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
Drying time must be at least 24 hours.
Water resistant after 7 days.
The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.