VITEX EMULSION ACRYLIC PAINT MAGNOLIA

VITEX EMULSION ACRYLIC PAINT MAGNOLIA

From: 15.85

Vitex Emulsion Acrylic Paint Magnolia available in two different sizes. For exterior use, based on acrylic copolymer resins. It exhibits great hiding power and high spreading rate. Easy to apply with very good leveling end produces a smooth flat surface. It is a good value for money paint, suitable for the professional painter.

SKU: N/A Category:

Description

• Acrylic paint for general use
• Great hiding power
COLOURS
Available in white and an unlimited number shades through Vitex’s Colorfull Tinting System.
SURFACE PREPARATION
Surfaces should be smooth, clean and dry, free from grease, dust, loose or flaking paint.
To fill any cracks or holes use Acrylic Putty.
Surfaces previously covered with water paints or distempers (lime wash or ceiling white) should be primed with Acrylan Unco Eco, Durovit or Vitosin.
New surfaces made of plaster, concrete, cement, plasterboard, etc. should be first primed with Acrylan Unco Eco or Durovit.
APPLICATION
Stir well before use. Apply two coats by roller, brush or airless spray gun diluted up to 10% with water. Do not apply at temperature below 5°C, above 35°C and/or relative humidity above 70%. Avoid application when rain or frost is expected in the next 48 hours.
It is touch-dry after 15-30 minutes and can be recoated after 3-4 hours. Drying time depends on weather conditions (humidity and temperature).
Allow at least 3 weeks before cleaning and washing newly painted surfaces with Vito Acrylic Paint. Wash gently with water using a soft sponge. In case of bad stains, use a mild colourless detergent or soapy water.
Tools must be cleaned immediately after use with water and if needed with soapy water or a detergent.

Additional information

Brand

Vitex

Type

Emulsion Acrylic

Size

3L, 9L

Colour

Magnolia

Drying Time

15-30 Minutes

Consumption

10-12m/L

Water Demand

0-10%

Go to Top