All Building Materials Products
-
Vitex Primer For Glossy Surfaces available in two different sizes.
-
Al-Chimica Hyperdesmo C-LV Red available in three different sizes. For waterproofing and protection of roofs, verandas and balconies, rooms, bathrooms, plasterboard, elenite, asphalt and other surfaces. Low viscosity cast elastic film, polyurethane base, one component.
-
Al-Chimica Hyperdesmo C-LV White available in three different sizes. For waterproofing and protection of roofs, verandas and balconies, rooms, bathrooms, plasterboard, elenite, asphalt and other surfaces. Low viscosity cast elastic film, polyurethane base, one component.
-
Knauf Readyfix 25Kg Orange. Ready-to-use grouting material and plasterboard finishing
-
Pvc Corner Bead With Anti-Alkaline Mesh 100x100mm 2.5m.
-
Multi Connector For Cd 60/27. Knauf Multi Clip M & multi-connector for guide CD-Profile 60/2
-
Plasterboard Primer 15kg. Tiefengrund plus Paint primer, synthetic resins without solvents to apply to absorbent surfaces Consumption: 100gr / m2
-
Knauf Levelling Fe 60 Magic 25kg. Filling mortar floors for application in thickness 10 to 60 mm Consumption: 17 kg / 10 mm / 1 m2
-
Knauf Pilomax 25kg. Ready-made cement mortar general purpose repair clay. It is classified as mortar type CSIV - W0 according to EN 998-1
-
Mineral Wool Ecose Technology Knauf 1.20x6.7m. Rolls NatuRoll Plus λ = 0.040 W / mK, general purpose and for roofs, non-combustible A1 Rolls width 1,200
-
Vitex White Water Based Primer For Gypsumboard available in two different sizes. Due to the high filling capacity of the product, you equate the absorbency of the plasterboard paper, the jointing material and the rest for surface painting
-
Ready to use white fine grained finishing putty of large surfaces in paste, suitable for interior walls and ceilings of plaster, gypsum board and concrete surfaces where required perfect surface finishing (with bright lighting, decoration styles, etc).
-
Ready to use white putty of large surfaces in paste, suitable for interior walls and ceilings of plaster, gypsum board and concrete surfaces.
-
Ideal undercoat to every water-based or solvent-based enamels, covers and effectively fills the surface, dries quickly and is easy to sand. Ideally prepares any surface for the final coating.
-
Quartz sand bonding primer based on acrylic resins with high alkaline strength, suitable for indoor and outdoor use.
-
Water-based, virtually odorless undercoat, 100% acrylic, with excellent adhesion to masonry, providing surfaces with less absorbency. Easy to apply with high spreading rate. Improves appearance, adhesion, hiding power and durability of the final coating.
-
Vitex Primer For Glossy Surfaces available in two different sizes.
-
New technology white waterborne primer, based on acrylic resins, for exterior and interior use, that can be colored through Vitex Coloring System and increases coverage by reducing the numbers of layers required of topcoat.
-
Elastomeric water-based acrylic putty that can be used for repair and waterproofing of interior and exterior surfaces.
-
Transparent solvent-based acrylic undercoat. Waterproofs surfaces and allows them to “breathe”. It has excellent adhesion, penetrates into porous surfaces and is an ideal undercoat for final coating with acrylic and emulsion paints.
-
Certified, ecological, white matt, water-based undercoat of 100% acrylic resins. It has very good hiding power and is applied on interior and exterior surfaces. Its special formula allows for effective covering of smoke, yellowing, nicotine etc. and wood tannins.
-
Vitex Anti-Rust Primer Grey available in three different sizes. Extremely durable, it protects the metal surfaces and prepares them properly for the final painting. Offers traction, coverage, elasticity and perfect spread.